If you have a fire or water emergency, please call us now at (856) 686-0100

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration


commercial fire damage in Deptford NJ

commercial fire damage in Deptford NJ

 Fire and smoke affected entire first and second floor.  SERVPRO crew arrived to board up.  Crew also set up air scrubbers and poly and containment.  Property affected material were gutted.  Property was cleaned. One of the most important elements that determines the success of a smoke damage restoration is the speed with which the situation is handled. The longer the aftermath of a fire is left to sit, the less likely the chance of reversing the damage. It only takes minutes for soot to make plastics yellow, and cause porous surfaces to discolor. In the span of a few hours, bathroom grouts and the finishes on furniture and appliances will also discolor. Within days, most fabrics, including clothing and upholstery, become stained, possibly permanently, while wood and vinyl begin to require refinishing. Metals corrode, while glass and crystal become pitted. If the smoke damage restoration process is put off for too long, the fine layers of soot that have covered every surface may be hard to dissolve and remove.

The expense of a project such as this relies heavily on the amount of harm done. The more time that elapses between the fire and the restoration, the more expensive and extensive the project is likely to be. The best way to control harm and costs is to approach the problem immediately. The most accurate expense estimate can be figured out after an initial cleaning. The first step in smoke damage restoration is to clean the room in order to determine what the permanent damage is. Once that is identified, the process of remediation can begin. Someone with experience will know that the cleaning process has to be done from top to bottom. Ceilings are the first area that must be tended to, because the waves of hot air during the fire carry layer after layer of soot, sometimes acidic, to coat everything at every height.   

Another part of the process is to locate and remove the source of unpleasant odors to prevent resoiling of areas that are already clean. Lingering scents are handled with a counteractant, like a fog or gas that can go into all little nooks and cracks that smoke particles entered. When the counteractant meets with residue, it works to break it down.

Customer was satisfied with all phases of work.  Customer also provided referral for another project.